Bnc 1105 Universal Counter Manuel d'utilisateur télécharger pdf (Page 66)

6666

D+

Green

Limit Test Fail

GND

Black

GND

Figure 5-1

Note: The Pass/Fail Output can’t be used on Volt Peak and Totalize.

5.2 Pass/Fail Output via DB9 Connector

The DB9 connector is an optional accessory for another kind of Pass/Fail

solutions. With the connector assistance, and by the setting set to DB9

according to the similar operation procedure in the Chapter 5.1, the DB9

will output +12V via Pin4 as the limit test is passed, and the DB9 will

output -12V via Pin4 as the limit test is failed. Figure 5-2 shows the DB9

connector.

Pin Number

Type

Descrip

tion

4 Output

Data Terminal Ready(DTR)

Measurement In-Limit Signal

Signal Ground

All other pins:no connection

Figure 5-2

Note: The Pass/Fail Output can’t be used on Volt Peak and

Totalize.

5.3 Setting Up for Remote Access

Users may use the MODEL 1105 application developed by BERKELEY

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 196 197

Pas de commentaire

Bnc 1105 Universal Counter Manuel d'utilisateur Page 66