Bnc 1105 Universal Counter Manuel d'utilisateur télécharger pdf (Page 107)

107

107107

107



When using ASCii format, numeric data is transferred as ASCII bytes in <NR3>

format. The number of significant digits will range from 1 to 15, depending on the

measurement resolution. Only significant digits will be returned.



If there is no valid result, error -230 will be generated and 9.91E37(Not A Number)

will be returned.



If Totalize or Voltage Peaks are chosen, error 0221 will be generated and

9.91E37(Not A Number) will be returned.

Notes



If this command is sent when a measurement is in progress, the results will not be

available until the measurement is completed, and it also holds off the subsequent

commands unless there is a device clear or a power cycle.



The last computed result remains valid until a new calculation is made to a relevant

instrument state is modified.

:CALCulate[1]:FEED “[:]SENSe[1]”

Feeds the data to the CALCulate[1] block.

Return



The string “SENS” is returned.

:CALCulate[1]:IMMediate

Instructs the counter to re-compute the current data without re-acquiring data.

This command will not affect:

:CALC2:LIM:FCO

:CALC2:LIM:PCO

:CALC3:…

Return



Results are formatted according to :FORMat[:DATA] ASCii|REAL setting.



When using ASCii format, numeric data is transferred as ASCII bytes in <NR3>

format. The number of significant digits will range from 1 to 15, depending on the

measurement resolution. Only significant digits will be returned.



If there is no valid result, error -230 will be generated and 9.91E37(Not A Number)

will be returned.



If Totalize or Voltage Peaks are chosen, error 0221 will be generated and

9.91E37(Not A Number) will be returned.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 196 197

Commentaires sur ces manuels

Pas de commentaire

Bnc 1105 Universal Counter Manuel d'utilisateur Page 107

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Bnc 1105 Universal Counter