Bnc 835 Programmer Manual Manuel d'utilisateur télécharger pdf (Page 55)

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901

Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com

5.18 [SOURce]:VOR Subsystem

This subsystem provides VOR signal generation. It is only available to devices featuring the avionics

modulations extension (AVIO).

Command

Parameters

Unit

(default)

[SOURce]:VOR[:STATe]

ON|OFF|1|0

OFF

[SOURce]:VOR:BEARing

<value>

0 rad

[SOURce]:VOR:TEST

NORTh

:VOR[:STATe]

[SOURce]:ILS:GS[:STATe] ON|OFF|1|0

[SOURce]:ILS:GS[:STATe]?

This command enables or disables the VOR modulation.

*RST OFF

:VOR[:STATe]

[SOURce]:VOR:BEARing <value> [RAD|DEG]

[SOURce]:VOR:BEARing?

This command sets the VOR bearing in radians. Append DEG to set the bearing in degrees.

*RST OFF

:VOR:TEST

This command selects a predefined VOR test setting.

*RST NORTh

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 64 65

Pas de commentaire

Bnc 835 Programmer Manual Manuel d'utilisateur Page 55