Bnc 835 Programmer Manual Manuel d'utilisateur télécharger pdf (Page 53)

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901

Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com

5.17 [SOURce]:ILS Subsystem

This subsystem provides ILS glideslope and localizer signal generation. It is only available to devices

featuring the avionics modulations extension (AVIO).

Command

Parameters

Unit

(default)

[SOURce]:ILS:GS[:STATe]

ON|OFF|1|0

OFF

[SOURce]:ILS:GS:AM0[:DEPTh]

<value>

0.4 (40 PCT)

[SOURce]:ILS:GS:AM1[:DEPTh]

<value>

0.4 (40 PCT)

[SOURce]:ILS:GS:TEST

DDM0|UP|DOWN|FLAG

DDM0

[SOURce]:ILS:LOCalizer[:STATe]

ON|OFF|1|0

OFF

[SOURce]:ILS:LOCalizer:AM0[:DEPTh]

<value>

0.2 (20 PCT)

[SOURce]:ILS:LOCalizer:AM1[:DEPTh]

<value>

0.2 (20 PCT)

[SOURce]:ILS:LOCalizer:TEST

DDM0|LEFT|RIGHT|FLAG

DDM0

:ILS:GS[:STATe]

[SOURce]:ILS:GS[:STATe] ON|OFF|1|0

[SOURce]:ILS:GS[:STATe]?

This command enables or disables the ILS glide slope modulation.

*RST OFF

:ILS:GS:AM0[:DEPTh]

[SOURce]:ILS:GS:AM0[:DEPTh] <value>

[SOURce]:ILS:GS:AM0[:DEPTh]?

This command sets the 90 Hz glide slope amplitude modulation depth.

*RST 0.4

:ILS:GS:AM1[:DEPTh]

[SOURce]:ILS:GS:AM1[:DEPTh] <value>

[SOURce]:ILS:GS:AM1[:DEPTh]?

This command sets the 150 Hz glide slope amplitude modulation depth.

*RST 0.4

:ILS:GS:TEST

[SOURce]:ILS:GS:TEST DDM0|UP|DOWN|FLAG

This command selects a predefined ILS glide slope test setting.

*RST DDM0

:ILS:LOC[:STATe]

[SOURce]:ILS:LOC[:STATe] ON|OFF|1|0

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 64 65

Commentaires sur ces manuels

Pas de commentaire

Bnc 835 Programmer Manual Manuel d'utilisateur Page 53

Commentaires sur ces manuels

Produits connexes et manuels pour Générateurs Bnc 835 Programmer Manual